Language: EN | BM |

ROWE AXLE & MANUAL TRANSMISSION OILS SERIES : RELIABLE DRIVETRAIN PROTECTION IN MALAYSIA

Modern manual transmissions, axle drives and differentials operate under high loads, elevated temperatures and continuous mechanical stress. Choosing the correct lubricant is important for reliable lubrication, wear protection and dependable drivetrain operation.

The ROWE Axle & Manual Transmission Oils Series comprises specialised lubricants formulated for different drivetrain requirements. The range includes fully synthetic PAO and ester-based formulations, HC-synthetic formulations and mineral-oil-based products for applications specified by the vehicle or equipment manufacturer.

From modern passenger-car manual gearboxes and Limited Slip applications to axle drives, off-road vehicles, heavy-duty vehicles and work machines, ROWE offers specialised gear oils for a wide range of drivetrain applications.


01 | HIGHTEC TOPGEAR FE SAE 75W-80 S
Fully Synthetic Manual Gearbox Oil

HIGHTEC TOPGEAR FE SAE 75W-80 S is a fully synthetic high-performance manual gearbox oil with reduced cold viscosity, specially developed for modern passenger-car manual gearboxes.

Based on fully synthetic PAO and ester technology, its reduced viscosity and optimised viscosity-temperature behaviour are designed to improve gearbox efficiency and cold-shifting characteristics while providing reliable wear and corrosion protection.

Key Benefits :

  • Reduced cold viscosity for excellent fuel efficiency
  • Optimised gearbox efficiency
  • Smooth shifting characteristics with low shifting effort
  • Fast lubrication and low cold wear
  • Very good protection against wear and corrosion
  • High-temperature and oxidation stability
  • Excellent shear stability
  • Stable lubricating film under high loads
  • Reduced wear and lower gearbox noise

Specifications :

  • API GL-4 / GL-5

ROWE Recommendations :

  • BMW MTF LT-1 / LT-2 / LT-3 / LT-4
  • Fiat 9.55550-MZ2
  • Ford WSS-M2C200-D2
  • MB 235.10
  • PSA 9730 A2/A8/B 71 2330
  • Toyota JWS 227
  • VW G009 317 / G052 171 / G052 178 / G052 512 / G052 532 / G052 527 / G052 726 / G052 798 / G055 726

These specifications and recommendations correspond to the ROWE product information.

Applications : For modern passenger-car manual gearboxes according to the vehicle manufacturer's specifications. The reduced viscosity and optimised viscosity-temperature behaviour are designed to improve fuel efficiency and reduce CO₂ emissions while supporting smooth shifting.

Important : Not suitable for use in stepped automatic transmissions, DCT/DSG transmissions with dual-clutch running in an oil bath, or CVT transmissions. Always select the lubricant according to the vehicle manufacturer's specifications.


02 | HIGHTEC TOPGEAR SAE 75W-90 HC-LS
Multi-Functional HC-Synthetic Gear Oil

HIGHTEC TOPGEAR SAE 75W-90 HC-LS is a high-performance multigrade gear oil based on HC-synthetic technology, developed for manual gearboxes and axle gears with or without Limited Slip differentials.

It is designed for multi-functional use in passenger cars, heavy-goods vehicles, off-road vehicles and work machines. Its special additive composition also allows use in axle gears with multi-disc locking differentials, according to manufacturer specifications.

Key Benefits :

  • Suitable for manual gearboxes and axle gears
  • Suitable for applications with or without Limited Slip differentials
  • Suitable for axle gears with multi-disc locking differentials
  • Outstanding wear and corrosion protection
  • Excellent synchroniser compatibility
  • High-temperature and oxidation stability
  • Excellent shear stability
  • Stable lubricating film under high loads
  • Improved shifting ability at low temperatures
  • Fast lubrication and low cold wear
  • Helps reduce wear and gearbox noise

Specifications :

  • API GL-4 / GL-5 / GL-5 LS (Limited Slip)
  • MIL-L 2105D

Applications : Passenger cars, heavy-goods vehicles, off-road vehicles and work machines, according to manufacturer specifications.

Important : Not suitable for use in stepped automatic transmissions, DCT/DSG transmissions with dual-clutch running in an oil bath, or CVT transmissions. Always confirm the required viscosity and lubricant specification before use.


03 | HIGHTEC HYPOID EP SAE 75W-140 S-LS
Fully Synthetic High-Performance Hypoid Gear Oil

HIGHTEC HYPOID EP SAE 75W-140 S-LS is a fully synthetic, high-performance multigrade hypoid gear oil for axle gears and transfer/splitter gearboxes with or without Limited Slip differentials, according to manufacturer specifications.

It is based on fully synthetic PAO and ester technology combined with advanced additive technology. The formulation is designed for passenger cars, heavy-goods vehicles, off-road vehicles and work machines operating under demanding conditions.

Key Benefits :

  • Fully synthetic PAO and ester-based technology
  • Outstanding protection against wear and corrosion
  • High oxidation stability
  • Very good shear stability
  • Stable lubricating film under high loads and high oil temperatures
  • Reduced wear and lower gearbox noise
  • Favourable cold viscosity for fast lubrication and low cold wear
  • Suitable for axle gears and transfer/splitter gearboxes
  • Suitable for applications with or without Limited Slip differentials

Specifications :

  • API GL-4 / GL-5 / GL-5 LS (Limited Slip)
  • MIL-L 2105D

ROWE Recommendations :

  • BMW Hinterachsgetriebeöl MSP/A
  • Ford M2C187-A/ 192-A/ 192-A+M2C118-A
  • GM 12346140 / 1942386
  • MB 235.61

The current ROWE product page confirms the same SAE 75W-140 viscosity, fully synthetic base oil, specifications and ROWE recommendations.

Applications : Primarily axle applications in passenger cars, heavy-goods vehicles, off-road vehicles and work machines, according to manufacturer specifications. The product is suitable for units with or without multi-disc locking differentials due to its additive composition.

Important : Not suitable for use in automatic gearboxes, DCT/DSG transmissions or CVT drives. Always use according to the vehicle or equipment manufacturer's specifications.


04 | HIGHTEC TOPGEAR SAE 80W-90 HC
Multi-Functional HC-Synthetic Gear Oil

HIGHTEC TOPGEAR SAE 80W-90 HC is a high-performance multigrade transmission oil based on HC-synthetic technology, developed for manual transmissions and axle drives.

It provides a stable lubricating film under continuous stress and is designed for multi-functional use in manual gearboxes, hypoid axle gears, planetary gearboxes, auxiliary drives and steering gearboxes.

Key Benefits :

  • Excellent wear and corrosion protection
  • Good compatibility with non-ferrous metals
  • High oxidation protection
  • Excellent shear stability
  • Stable lubricating film under high loads and high oil temperatures
  • Improved shifting ability at low temperatures
  • Faster lubrication and lower cold wear
  • Suitable for synchronised and non-synchronised gearboxes
  • Multi-functional use in axle, planetary, auxiliary and steering gearboxes

Specifications :

  • SAE J2360
  • API GL-4 / GL-5 / MT-1
  • AVTOVAZ
  • DTFR 12B100 (ex. MB 235.0)
  • Mack GO-J
  • MAN 341 Type E2 / Z2; MAN 342 Type M2
  • MERITOR
  • NATO O-226
  • Scania STO 1:0
  • ZF TE-ML 02B, 05A, 07A, 08, 12E, 16B/C/D, 17A/B, 19B, 21A

ROWE Recommendations :

  • MF 1134
  • MIL-L-2105D/PRF-2105E
  • Volvo 97310/97312

Applications : Passenger cars, heavy-duty vehicles, buses, off-road vehicles and work machines, according to manufacturer specifications.

Important : Always select the appropriate lubricant according to the vehicle or equipment manufacturer's requirements.


05 | HIGHTEC HYPOID EP SAE 85W-90
High-Performance Heavy-Duty Axle Gear Oil
HIGHTEC HYPOID EP SAE 85W-90 is a mineral oil-based, high-performance multigrade gear oil developed for axle gears operating under high and continuous loads.
It is used for axle gears in passenger cars, heavy-goods vehicles and buses, as well as construction and agricultural machinery, according to manufacturer specifications.
Key Benefits :

  • Excellent wear protection
  • Very good load-carrying capability under heavy continuous loads
  • Excellent shear stability
  • Stable lubricating film under high loads and high oil temperatures
  • Good noise reduction
  • Good lubrication and lower cold wear
  • Outstanding corrosion protection
  • Good seal compatibility
  • Low foaming tendency

Specifications :

  • API GL-4 / GL-5
  • DTFR 12B100 (ex. MB 235.0)
  • MIL-L 2105D
  • MAN 342 Type M2
  • ZF TE-ML 05A, 07A, 12E, 16B/C, 17B, 19B

ROWE Recommendation :

  • DTFR 12B130 (ex. MB 235.6)

Applications : Passenger cars, heavy-duty vehicles, buses, construction machinery and agricultural machinery, according to manufacturer specifications.

Important : Always select the appropriate lubricant according to the vehicle or equipment manufacturer's requirements.

TO THE PRODUCT


Engineered for Different Drivetrain Requirements
The ROWE Axle & Manual Transmission Oils Series provides specialised lubrication solutions for different drivetrain applications, including:

  • Passenger-car manual transmissions
  • Manual transmissions and axle drives
  • Limited Slip differential applications
  • Hypoid axle gears
  • Transfer and splitter gearboxes
  • Planetary gearboxes
  • Heavy-duty vehicles and buses
  • Off-road vehicles and work machines
  • Construction and agricultural machinery
  • Auxiliary and steering gearboxes

The individual products are formulated for different applications and operating requirements. They should therefore be selected according to the required SAE viscosity, specification, application and vehicle or equipment manufacturer's requirements.

The range includes:

  • Fully synthetic PAO and ester technology : HIGHTEC TOPGEAR FE SAE 75W-80 S and HIGHTEC HYPOID EP SAE 75W-140 S-LS
  • HC-synthetic technology : HIGHTEC TOPGEAR SAE 75W-90 HC-LS and HIGHTEC TOPGEAR SAE 80W-90 HC
  • Mineral-oil-based formulation : HIGHTEC HYPOID EP SAE 85W-90


Choose the Right Oil for the Right Drivetrain
There is no single gear oil suitable for every transmission or axle application.
The correct SAE viscosity, API classification, manufacturer specification and application requirement must be considered before selecting a lubricant.

A suitable lubricant should always be selected according to the vehicle or equipment manufacturer's specifications. Product viscosity alone should not be used to determine suitability.

Whether the application involves a passenger-car manual gearbox, axle drive, hypoid gear, Limited Slip differential, transfer gearbox or heavy-duty drivetrain, always verify the required lubricant specification before filling.


Need Help Choosing the Right Gear Oil?
Not sure which ROWE Axle & Manual Transmission Oil is suitable for your vehicle or equipment?

Our team can help identify the appropriate product based on your vehicle, transmission, axle, differential or drivetrain requirements.


Racing Tech Lubricants Sdn Bhd
Exclusive Distributor of ROWE Germany in Malaysia

25 Sep 2026